A pipe network to size, a pump to choose, a propeller or a wing to design? Mecaflux carries out the calculation
with its own software and delivers a usable calculation note, together with the project file so you can take over afterwards.
Friction and minor head losses, pipe and duct sizing, balancing, piezometric graph, branched and looped networks, suction and
discharge lines, ventilation, flue ducts.
Software: Mecaflux Pro3D
Pumps and fans
Operating point on the system curve, selection from your catalogue, available NPSH and cavitation, series or parallel
arrangement, absorbed power and efficiency.
Software: Mecaflux Standard and Pro3D
Propellers, wings, foils and turbines
Blade or wing geometry, thrust, torque, efficiency, lift and drag, cavitation, aerofoil selection, 3D prototype exportable
to your CAD software.
Software: Heliciel
The delivered file opens in Mecaflux Pro3D: you modify the network and recalculate it yourself.
What you send us
A diagram or drawing of the network (a hand sketch is enough), or the specification of the propeller or wing.
The fluid and its temperature, the target flow rates or speeds.
For an existing pump or fan: its manufacturer curve. For a propeller: the torque-speed curve of the motor or generator.
What you expect: a diameter, a pump, an efficiency, the check of an existing calculation…
What you receive
A calculation note (PDF): assumptions, method, results, deviations and recommendations.
The project file in Mecaflux Pro3D, Mecaflux Standard or Heliciel format, to modify the network or the propeller yourself afterwards.
For propellers and wings: the 3D geometry exportable to your CAD software.
A debriefing call to go through the results together.
How it works and lead time
You describe your project with the form below, or by phone.
You receive within two working days a free quote stating the scope, the deliverables and the delivery date.
Once you agree, the calculation is carried out; we come back to you if any data is missing.
You receive the calculation note and the project file, then we go through them together.
Our commitments
Free quote with no obligation: scope, deliverables and price fixed before we start.
Calculations carried out by the author of Mecaflux Standard, Mecaflux Pro3D and Heliciel, with documented methods
(Darcy-Weisbach, Colebrook-White, blade element theory).
Your documents remain confidential and are never reused.
You keep your independence: the delivered file opens in the software, and training on your project can complement the study.
Describe your project
Five minutes is enough. The form prepares a structured e-mail that you send from your own mail client, with your attachments.
Prefer to talk it through? +33 4 50 10 68 90 or +33 6 87 64 45 83, Monday to Friday, 9 am to 7 pm (Paris time), in French or English, or contact@mecaflux.com.