Video tutorials, lesson
- start with Mecaflux Pro3D:
- discover Pro3D
- Create pipes, fittings and Accessories.
- Calculate the flow in a duct function of diameter and slope
- Insert fittings and Accessories.
- Connect networks as modules
- Graphics piezometric
- Branches and loops(1)
- Branches and loops(2)
- Export standard to pro3D
- create and insert pumps and fans in the network
- Compare curves of pumps and fans with the pressure losses curves of hydraulic or aeraulic network
- use the aspiration to create the extraction systems
- go further:
- Pipe Fittings editor: Save Pipe Fittings element with a minor head loss coefficient constant
- Pipe Fittings editor: Save Pipe Fittings element with a minor head loss coefficient variable
- model a network of pipes using a coordinate file gathered on the ground
Tutorials mecaflux Pro3D
Start with mecaflux Pro3D: insert ductwork, elbows and fittings in a aeraulic or hydraulic network
Save pipes in the library allows to quickly insert in aeraulic or hydraulic networks . Suffice it to drag the selected pipe in the library to the 3D network diagram
The calculation of the flow in a duct with a diameter and a given altitude is a case often encountered...
Insert Pipe Fittings valves, elbows, cones, ... in a aeraulic network or hydraulic network for calculation of pressure losses
Connect networks to other networks allows reuse and insert of pre-recorded modules...
Create branches in a hydraulic or aeraulic network
Create branches in a hydraulic or aeraulic network
Export from MECAFLUX standard to MECAFLUX networks pro3D
Save pumps or fans in the library allows quick insert in aeraulic or hydraulic networks . You ll just have to drag the selected pump from the library to the 3D network diagram to test the operating point.
Mecaflux pro3D calculating the operating points of pumps and fans for a given network, it may be useful to compare load curves of various configurations of a network , to a list of curves of pumps or fans . Use the comparisons curves tools for pumps and networks
model a network of pipes using a coordinate file gathered on the ground
Save Pipe Fittings element with a coefficient of loss constant
Pipe Fittings editor: Save Pipe Fittings element with a coefficient of loss variable.
modeling networks and extraction systems...
The graphs piezometric are useful for explaining pressure changes in the network