The inventory of friction pressure loss and elements pressure drop shows the calculated losses as a table representing a portion of your network.

You can save inventory of the portion ao the network and use this section in graphical analysis to test and edit charts versus flowrate..

The different sections of the network can be positioned on suction or discharge of the pump for test cavitation in the tab "turbines/pump ."

It is possible to disable some calculated elements or modify the number of parts.exemple:If you've got 10 pipes of the same lenght an section you just have to input the number, to adjust the total losses..

The inventory of the pressure loss can be edited in a spreadsheet (Excel or other) to process the data (graphs, sorting or printing)

The inventory of the pressure loss calculated, is displayed at the bottom of screen. In this exemple the user will perform a graphical analysis of network, testing flow of 47 to 150 liters per minute . He may well see the evolution of pressure drop versus flow and search for points of functioning for a pump with the pump editor

The different sections of your network are calculated and saved. You can return to the calculation of a line to change some settings . Simply select the line edit and click "edit line" . Multiple choice of changing your section is offered to you , you can change the number of element , delete the line and also recharge in the interface for calculating pressure drop or, for example, change the length of the duct or roughness ...

Inventory allows you to save sections for use in the future . You can also create sections "standard" was commonly reused .